Lum-Tec Watch Glossary

Lum-Tec product pages use a lot of watch terms. This glossary explains the ones you will see most often on the Lum-Tec watches we carry, using Lum-Tec's own descriptions. For a side-by-side look at the models, see Which Lum-Tec Is Right for Me?

Lume

MDV® luminous technology

MDV is how Lum-Tec builds its lume. The luminous parts of the dial are printed with more than 30 layers of top-grade Super-LumiNova over a chemically coated, reflective base, which sends the light out the front of the watch instead of back into the dial. Lum-Tec says its dials have been tested and verified by RC Tritec in Switzerland to be top performers of the Super-LumiNova material. Read more in What Is MDV Lume?

Super-LumiNova grades

Super-LumiNova is the Swiss luminous material Lum-Tec uses. The grade sets the glow color. On the models we carry you will see:

  • X1 C3: a green glow, used on models including the Combat Field X4 and X6 GMT, Combat B68, Combat B74 GMT, Eclipse E3, E5 and E6, RPM 3 and Super Combat B5.
  • X1 208LE: a green glow, used on the Eclipse E1.
  • X1 C3 BL: a blue glow, used on the Combat B64 Chronograph.
  • Grade A BGW9: used on models including the Combat B67 and the Solar Marine.

Luminous pip

A small luminous dot on the bezel. On the Solar Marine it sits on the rotating bezel, and Lum-Tec describes it as being there for timing dives.

Crystal and caseback

Sapphire crystal

Every Lum-Tec watch we carry has a sapphire crystal. Some models use a domed or double-curved sapphire; each product page lists which.

AR (anti-reflective) coating

A coating that cuts glare on the crystal. Lum-Tec lists a military-grade AR coating, applied on the inside of the sapphire on some models and on both sides on others. On several models Lum-Tec describes it as a DLC anti-reflective coating applied to the inside of the sapphire.

Hytrel mount

Some models, like the Eclipse, have the sapphire crystal set in a Hytrel mount.

Display (exhibition) caseback

A sapphire window in the back of the case that shows the movement, found on models such as the Combat Field X4 and the Eclipse.

Movements

Automatic

A mechanical movement that winds itself from the motion of your wrist through a rotor. Lum-Tec automatics we carry use the Japanese Miyota 9075, 9039 and 9015, or the Swiss Sellita SW261-2 Power+.

Quartz

A battery-powered movement. Lum-Tec quartz models we carry use the Japanese Miyota 2105 (day-date), the Miyota OS21J and OS20 (chronographs) or the Swiss Ronda 515.

Solar quartz

A quartz movement charged by light through the dial. The Solar Marine series uses the Japanese VS42A. Lum-Tec says about a minute of sunlight gives a day of power, and a full charge gives about a six-month power reserve, so there are no routine battery changes.

Miyota 9075 (true GMT)

A Japanese automatic with a true GMT function: you can jump the local hour hand forward or back on its own when you change time zones, without stopping the watch. It has 24 jewels, beats at 28,800 vph (4 Hz) and has a 42-hour power reserve. Found in the Combat B74 GMT, Combat Field X6 GMT, M94 and M94D, and also in the Combat Field X4.

Miyota 9039

The Japanese automatic in the ultra-thin Eclipse series, adjusted in six positions after assembly.

Miyota 9015

The Japanese automatic in the Combat B69 and B70. It beats at 28,800 BPH and has hand winding and hacking seconds.

Sellita SW261-2 Power+

The Swiss automatic in the Super Combat B5. Lum-Tec lists a typical power reserve of 60 hours.

Hacking seconds

The seconds hand stops when you pull out the crown, so you can set the time to the exact second.

Regulated in six positions

After assembly, Lum-Tec adjusts the timing of its automatics with the watch held in six different positions.

Anti-shock movement mount

Lum-Tec's mounting system lets the movement absorb the impact of an accidental drop or a hard knock against a wall.

Complications

GMT

A watch that shows a second time zone, usually with an extra 24-hour hand.

Chronograph

A stopwatch built into the watch. The Combat B64's Miyota OS21J has a 60-minute chronograph timer and a 24-hour sub-dial.

Day-date

Shows both the day of the week and the date, as on the Combat B67 and B68.

Water resistance

What the ratings mean on our watches

Lum-Tec rates each model in meters. Among the models we carry:

  • 50 m: RPM 3.
  • 100 m: Combat Field X4, Combat Field X6 GMT and Eclipse E1, E3, E5 and E6.
  • 200 m: Combat B64, B67, B68, B69, B70, B71, B72, B73 and B74 GMT, M94 and M94D.
  • 300 m: Solar Marine 5, 6, 7 and 8 and Super Combat B5.

On many models Lum-Tec says the sealing is tested to 30% beyond the rating, and that the seals are meant to stand up to salt water, chemicals and extreme heat or cold as well as depth.

Protecting your water resistance

If your watch has a screw-down (screw-lock) crown, make sure it is fully secured before the watch gets wet, and never take it deeper than its rating. Lum-Tec's warranty does not cover water damage from an unsecured crown or from going past the rating.

Screw-lock crown and Viton® gaskets

A crown that screws down against the case to seal it. Lum-Tec uses Viton® gaskets, and on some models silicone-lubricated double Viton seals, at the crown and threaded caseback.

Case, bezel and finish

316L stainless steel

The surgical-grade steel used for most Lum-Tec cases. Many are forged and heat treated for hardness.

Grade 2 titanium

Used on the Combat Field X4 and X6. Lum-Tec says it wears lighter than steel. The Super Combat B5 has a forged, heat-treated full titanium case.

CuSn8 bronze and patina

The M94 and M94D have solid CuSn8 bronze cases and crowns. Bronze develops its own patina with wear. See our bronze patina care guide.

PVD coating

A hard surface coating. Lum-Tec uses titanium carbide PVD in gunmetal or black on many Combat B, Solar Marine 6 and titanium models, and a micro-polished titanium nitride PVD on the Solar Marine 8. Lum-Tec compares titanium nitride to the coating used on drill bits.

Bead blasted, brushed and polished

Case finishes. Bead blasting gives a matte surface; brushed and polished finishes mix satin and shiny areas. Many models also have an anti-fingerprint coating.

Rotating bezel

A ring around the crystal that turns. The Solar Marine has a rotating bezel with a steel insert and a luminous pip.

Straps and fit

Lug width

The distance between the lugs, where the strap attaches. A strap must match it. Our watches use 20 mm (Solar Marine, RPM 3, Combat B74 GMT), 22 mm (Combat B 43 mm models, Combat Field X4 and X6) or 24 mm (M94, M94D, Super Combat B5). The Eclipse uses an integrated bracelet that tapers from 26 mm to 18 mm.

Lug to lug

The length of the watch from the tip of the top lugs to the tip of the bottom lugs. It tells you how the watch will fit across your wrist. Each product page lists it.

Quick-release spring bars

Spring bars with a small lever so you can change straps without tools. Many Lum-Tec straps come with them.

FKM rubber

A fluoroelastomer rubber. Lum-Tec says it resists heat, UV and solvents while staying flexible. Browse straps and buckles.

Limited and numbered

Many Lum-Tec models are made in limited, numbered runs, for example 500 pieces of most Combat B models, 300 of the Eclipse and Solar Marine, 200 of the Super Combat B5 and 100 of the M94 and M94D.

Questions about a term or a model? Email us. You can also browse all Lum-Tec watches or read the Lum-Tec watch FAQ.